Product Features
? Engineering plastic wear resistance washer. Suitable for a fitting to the uncontrollable axial space in order to reduce the vabriation and noise during the operation.
Compensate the axial clearance and machining tolerance;
Shock absorbing and noise optimization;
Maintenance free and self-lubricated;
Corrosion resistance and light weight.
Structure Design
CSB-PEW plastic flat spring is designed with a bump axial surface for the purpose of compensates the axial fitting and machining tolerance in addition to function as a normal washer. Therefore the operation mechanism could be more stable and with less noise.
Material Design
CSB-PEW plastic flat spring is made from the professional wear resistance material CSB-EPB13 which provides good wear resistance and excellent spring feature. At the same time, CSB could also provide the spring washer with high temperature (up to 250?) material CSB-EPB5 and FDA approved material CSB-EPB5A.
Assembly Design
In order to adjust the fitting clearance, a single flat spring is usually inserted. For bigger clearance adjustment, a group of flat springs combined with back to back or face to face is also a good solution. If a higher elastic characteristic is needed, piling the flat springs parallel and assembles into the required position.
CSB-PEW Plastic Flat Springs
Order P/N |
Spring deflections and spring forces |
|||||||||||
D |
d |
t |
h0 |
h0.25 |
F0.25 |
h0.5 |
F0.5 |
h0.75 |
F0.75 |
Fmax |
weight |
|
PEW13-05 |
10 |
5.2 |
0.5 |
0.25 |
0.06 |
1 |
0.13 |
2.4 |
0.19 |
3.6 |
5 |
0.04 |
PEW13-06 |
12.5 |
6.2 |
0.7 |
0.3 |
0.08 |
3 |
0.15 |
5.1 |
0.23 |
8 |
12 |
0.11 |
PEW13-08 |
16 |
8.2 |
0.9 |
0.35 |
0.09 |
4 |
0.18 |
8 |
0.28 |
11 |
15 |
0.2 |
PEW13-10 |
20 |
10.2 |
1.1 |
0.45 |
0.11 |
5 |
0.22 |
10 |
0.33 |
15 |
18 |
0.33 |
PEW13-12 |
25 |
12.2 |
1.5 |
0.55 |
0.14 |
9 |
0.28 |
18 |
0.42 |
27 |
40 |
0.85 |
PEW13-16 |
31.5 |
16.3 |
1.75 |
0.7 |
0.18 |
15 |
0.35 |
32 |
0.53 |
51 |
70 |
1.44 |
PEW13-20 |
40 |
20.4 |
2.25 |
0.9 |
0.23 |
35 |
0.45 |
70 |
0.68 |
110 |
130 |
3.1 |
D:Outer diameter
d:Inner diameter
t:Thickness
h0:Maximum downward deflection of spring
h0.25 ,h0.5 ,h0.75:The maximum downward deflection:25%,50%,75%
F0.25 ,F0.5 ,F0.75:Spring force with 25% 50% 75% downward deflection
Fmax.:The maximum spring force
CSB-PEW Plastic Flat Springs Installation Method
http://www.csbbearings.com/